MGP 24 is a safe, efficient universal cleaner with a pleasant fragrance. Recommended for ordinary and extraordinary cleaning of treated and waxed surfaces of marble, polished granite, ceramic and natural stone.
Yield: 1 litre for about 100 sqm.
Instructions: ordinary cleaning: use 1 litre every 30 litres of water. Thorough cleaning: use 1 litre every 10 litres of water. Apply the product, diluted as required, with a floor-mop and rub until the surface is cleaned. Allow to dry before walking on it. 

MGP 30 Cleaner for removing sealing residues from porcelain grès and natural stones, and concrete residues from slate; especially recommended for cleaning cobblestones, rosettes and ancient-finished marbles.
Yield: 1 litre for about 4 - 6 sqm.
Instructions: slight dirt: use 1 litre MGP 30 every 5 litres of water. Persistent dirt: use 1 litre MGP 30 every litre of water. Pour the solution directly onto the surface, wait 5-10 minutes before polishing with a floor brush in case of manual cleaning or a cleaning machine. Remove any residue with a wet-vacuum. Rinse with water. For split or rough surfaces, pour the solution and polish using a cleaning machine and a tynex brush to perfectly clean the split interstices. On split-slates, pour the solution and polish with a scratch-brush to eliminate whithish spots caused by acid corrosion. Do not use it on polished marble. 

MGT 5 Finishing treatment with glazing effect for rough, sandblasted, bush-hammered, naturally split, honed surfaces, sandstone and limestone. Covers the stone pores and makes the cleaning easier without forming anti-aesthetic plastic films. Suitable for clear sandstone like "pietra dorata", Vicenza stone, French stones or sandblasted marbles like Carrara, Botticino, etc. protects the surfaces against stains and dirt.
Yield: 1 litre for about 8 - 10 sqm.
Instructions: polished surfaces: apply MGT 5 with a cloth. Rough or bush-hammered surfaces: spray 1 or 2 coats of MGT 5 with a low-pressure gun. Since MGT 5 is a finishing product, it is advisable to use it after applying a coat of a full-absorption water- or solvent-based impregnator.
 

MGT 27 K is a solvent-free, water-oil-proofing treatment for polished marble, granite and agglomerates. Protects polished marble and granite surfaces against staining substances like oil, coffee, grease, etc. It does not protect marble that can cause a slight corrosion. Creates a barrier against dirt and makes cleaning easier. Recommended for kitchen tops, tables, floors and linings.
Yield: 1 litre for about 12 - 15 sqm.
Instructions: evenly apply MGT 27 on the polished surface with circular movements; in case of highly absorbing surfaces, apply 2 coats. After drying and complete evaporation of the product, the surface will be protected and no residues or colour changes will be noted. On poorly absorbing marble and granite, the product can leave some residues. In this case, remove with a cloth or floor polisher. 

MGT 28 Full absorption, solvent-free, stain-proofing impregnator for sandstone in general, marble, granite, natural stone, sandblasted, bush-hammered, flammed or honed finished and concrete agglomerates. Protects the surfaces against dirt and grease.
Yield: 1 litre for about 6 - 8 sqm.
Instructions: apply MGT 28 by brush, cloth or low-pressure spray-gun also on wet surfaces. MGT 28 deeply penetrates into the stone and protects it against staining substances. MGT 28 is not a finishing product; therefore the use of a stain-proofing finishing product with glazed effect like MGT 5 is recommended. 

SPEEDY Rapid Wet effect treatment for Greek key designs, rosettes and mosaic of ancient-looking marble. The product dries rapidly and allows speeding up packaging operations, up the natural colour of ancient-finished marble and tumble cobblestones that due to processing have a whitened aspect. Suitable for brightening up all natural stones. Protects against dirt and offers a good water-repellence.
Yield: 1 litre for about 15 - 20 sqm.
Instructions: using a cloth evenly pour a few drops of SPEEDY on clean and dry surfaces with circular motions. Apply 1 coat.
 

PATINATO Protective liquid wax for ancient-looking marbles. Specific for glazed or brushed marble.
Yield: 1 litre for about 15 - 20 sqm.
Instructions: using a cloth evenly pour a few drops of PATINATO on clean and dry surfaces with circular motions. Apply 1 coat. It is possible to apply PATINATO with floor-polisher or floor-washer.